Permanent formwork RECOSTAL® Speed Edge
RECOSTAL® Speed Edge is widely regarded as one of the most effective permanent formwork systems for reinforced concrete base and floor slabs in commercial and industrial construction.
One of the standout features of the RECOSTAL® Speed Edge system is its rapid and easy installation process, which significantly reduces labor time on site. The formwork panels are lightweight and modular, allowing for quick positioning and alignment. RECOSTAL® Speed Edge, as a permanent formwork, reduces the need for additional labor and materials required for removal. The system becomes an integral part of the floor slabs, providing lasting structural benefits without the hassle of temporary formwork removal, saving both time and costs.
Benefits:
Time Savings – Installation of 1 meter of RECOSTAL® Speed Edge is 6 times faster than the traditional method due to the simplicity of the solution, narrower foundation excavations (about 1 meter), and no need for dismantling
Cost Reduction – Only 1 person is needed for installation, there is no need for a crane, and less backfilling is required, does not require disassembly
Self-Supporting up to H=50 cm confirmed in appropriate concreting tests
Low Transportation and Storage Costs
Easy to Form Corners
Lightweight construction
Corners simply bent into shape
Complex slabs easily formed
No stripping needed







RECOSTAL® Speed Edge Formwork is an innovative solution made of galvanised steel sheets used for base slabs and floor slabs. It is available in standard lengths of 2.25 m and in heights of 14 cm to 50 cm.
Technical data:
Material: galvanized steel sheet metal
Material thickness: 0.7 to 1.2 mm
Unit length: 225 cm
Installation heights: 14 to 50 cm (self-supporting), 50 to 100 cm (external support needed)
Packaging: packed on pallets, shrink wrapped
Storage: no limitations
Similar products
General recommendations:
During the installation observe the compulsory security standards - wear protective gloves.
STEP 1 - on the ground
Installation of RECOSTAL® Speed Edge on the ground.

STEP 1 - on concrete
Installation of RECOSTAL® Speed Edge on bedding concrete.

STEP 2
Connecting of RECOSTAL® Speed Edge. Joining the cut element with overlap of 3-4 cm.

STEP 3
Cutting the mountig foot and top of element at the corner. Bending the cut metal sheet at a right angle.

STEP 4
Concreting of foundation slab.
