Fix Anchor
For bracings in concrete. Since they can be nailed to the formwork skin at any point using the nail plug in the PE Foot or in the closing plug, the point is independent of existing anchor holes, and the formwork skin must not be perforated. Round Fix Anchors (20+26.5 mm) should be installed with the flat side facing downwards in order to reach higher pull-out values with a larger pull-out cone. The actual pull-out values depend on many factors, which is why we recommend to always carry out pull-out tests on site.
Article No. | Bar Ø [mm] | Plate Size [mm] | Height [mm] | Weight [kg/no.] |
|---|---|---|---|---|
15 F 3074 | 15 | 100 x 70 | 60 | 0.52 |
15 F 3174 | 15 | 80 x 55 | 60 | 0.45 |
20 F 3074 | 20 | Ø 90 | 80 | 0.85 |
26 E 3074 | 26.5 | Ø 120 | 70 | 1.90 |
Fix Anchor with Concrete Spacer Sleeve1) |
|
|
|
|
15 F 3074/S | 15 | 100 x 70 | 60 | 0.65 |
1) Including Nail Plug and Closing Plug, Installation depth = 125 mm Cast 15 F 3074 and 15 F 3174 are installed using a PE Foot 20 F 3074 and 26 E 3074 are installed using cones For details and specifications on request.
Safety Instructions
Appropriate use of form ties and accessories is necessary to prevent accidents and failure. All products are intented to be used by qualified and experienced workmen. It is the user's responsibility to continually inspect working hardware for wear and to discard worn parts. Improper use of the DYWIDAG Form Ties can expose workers to extreme danger that may result in severe injury or death.
