Swelltite - composite hydro-insulating membrane consists of a bentonite layer composited between layer of geomembrane and transparent layer of self-soluble foil.
Application:
Installation:
Membrane glue on Masprim SKW. Membrane installation from bentonite side toward the structure.
ARTICLE NUMBER | TYPE | TYPE OF MATERIAL | DIMENSIONS | QUANTITY [packs] |
---|---|---|---|---|
216-01 | Swelltite | bentonite | 1.0 m x 10.0 m | 1 roll |
216-02 | Masprim SKW | asphalt - rubber mass | 20 kg | 1 bucket |
CHARACTERISTICS | |
---|---|
Weight | ~ 3080 g/m2 |
Thickness | 2 mm |
Tensile strength in both directions | ≥ 9 kN/m |
Relative elongation at max. load in both directions | 160 ± 10 % |
Resistance to static penetration (CBR method) | ≥ 1.6 kN |
Displacement during penetration | 78 ± 10 % |
Resistance to dynamic penetration, hole diameter | ≤ 9 mm |
Edometric swelling ratio | ≥ 150 % |
Swelling time | 10 ÷ 25 doby |
Swelling pressure | ≥ 200 kPa |
General recommendations:
Preparation for the insulation of concrete foundation wall.
Placing of Swelltite with 5 cm of overlap.
Installation of steel strip: LVT or LVS. Setting
Setting styrofoam.