PERMANENT FORMWORKS - CONSTRUCTION JOINTS
Formax 5000
Formax 5000 - is used for making construction joints in RC structures. The load bearing structure is made of steel truss. Alternative term - Recostal 5000.
The load-bearing structure can be made of:
- steel truss
Length of element: L = 2.25 m.
System contains junction: Cross-shape, T, L.
Application range: for slab thickness 30 - 700 cm
Spacing of trusses:
- 20 - 90 cm - depends on height
| ARTICLE NUMBER | TYPE | LENGTH L [m] | HEIGHT H [m] | TYPE OF SUPPORT | THICKNESS g [mm] |
|---|---|---|---|---|---|
| 740-... | Formax 5000/0.70 | 2.25 | by order | truss | 0.70 |
| 741-... | Formax 5000/1.00 | 2.25 | by order | truss | 1.00 |
| 742-... | Formax 5000/1.25 | 2.25 | by order | truss | 1.25 |
| 743-... | Formax 5000/... | by order | by order | truss | by order |
General recommendations:
- During the installation observe the compulsory security standards - wear protective gloves and work clothes with long sleeves.
- During transport and storage, protect against mechanical damage.
- Above 90 cm stays made with rebars are needed.
- Up to 90 cm Formax 5000 is self-supported.
SELF-SUPPORTED H = 30-90 cm
Step 1
Installation of Formax 5000 to reinforcing mesh.
Step 2
Addition of upper reinforcement and wooden beam.
Step 3
Concreting - to do with pressure on the trusses.
STAYS H > 90 CM
Step 1
Installation of Formax 5000 with upper reinforcement and horizontal stiffness.
Step 2
Addition of upper reinforcement and wooden beam.
Step 3
Concreting - to do with a pressure on the trusses.
