PERMANENT FORMWORKS - CONSTRUCTION JOINTS
Formax 2000
Formax 2000 - is used for making construction joints in RC structures. Self-supported. Alternative term - Recostal 2000.
Load-bearing structure made of steel bars with diameters which depend on slab thickness.
Lenght of element: L = 2.25 m.
For slabs that are: 0.3 - 7.0 m.
”Key profile” construction joint transfers almost twice as big load than a flat profile profile.
Profil Formax 2000 meets all requirements for the ”key profile” construction joint
| ARTICLE NUMBER | TYPE | LENGTH L [m] | HEIGHT H [m] | TYPE OF SUPPORT | THICKNESS g [mm] |
|---|---|---|---|---|---|
| 730-... | Formax 2000/0.70 | 2.25 | by order | bar | 0.70 |
| 731-... | Formax 2000/1.00 | 2.25 | by order | bar | 1.00 |
| 732-... | Formax 2000/1.25 | 2.25 | by order | bar | 1.25 |
| 733-... | Formax 2000/... | by order | by order | bar | by order |
General recommendations:
- During the installation observe the compulsory security standards - wear protective gloves and work clothes with long sleeves.
- During transport and storage, protect against mechanical damage.
- Above 90 cm stays made with rebars are needed.
- Up to 90 cm Formax 2000 is self-supported.
SELF-SUPPORTED H < 30 CM
Step 1
Installation of Formax 2000 to reinforcing mesh.
Step 2
Adding a wooden beam.
Step 3
Concreting - to do with a pressure on the bars.
STAYS H > 90 CM
Step 1
Installation of Formax 2000 with upper reinforcement and horizontal stiffness.
Step 2
Installation of stays or supports.
Step 3
Concreting - to do with a pressure on the bars.
