PERMANENT FORMWORKS - CONSTRUCTION JOINTS
Formax 1000
Formax 1000 - is used for making construction joints in RC (reinforced concrete) structures. Alternative term - Recostal 1000.
Not self-supporting.
Key profile construction joints eliminate ”key displacement” between neighbouring RC and guarantee continuity of seal construction.
Profile meets all requirements for the highest category construction joints according to Eurocode 2.
Formax height range: 14 - 300 cm.
Standard length: L = 2.25 m
Formax 1000 installation between upper and bottom reinforcement of RC slab.
| NR ARTYKUŁU | TYPE | LENGTH L [m] | HEIGHT H [m] | THICKNESS g [mm] |
|---|---|---|---|---|
| 700-01 | Formax 1000 M/0.70 | 2.25 | 1.0 | 0.70 |
| 700-02 | Formax 1000 M/1.00 | 2.25 | 1.0 | 1.00 |
| 700-03 | Formax 1000 M/1.25 | 2.25 | 1.0 | 1.25 |
| 701-... | Formax 1000/0.70 | 2.25 | by order | 0.70 |
| 702-... | Formax 1000/1.00 | 2.25 | by order | 1.00 |
| 703-... | Formax 1000/1.25 | 2.25 | by order | 1.25 |
Non-standard elements are available (different length, height, variable height, etc.) by order.
General recommendations:
- During the installation observe the compulsory security standards - wear protective gloves and work clothes with long sleeves.
- During transport and storage, protect against mechanical damage.
- Above 90 cm stays made with rebars are needed.
- Up to 30 cm Formax 1000 is self-supported.
SELF-SUPPORTED H = 30 - 90
Step 1
Installation of reinforcing mesh.
Step 2
Installation of Formax 1000 for reinforcing mesh.
Step 3
Upper reinforcement installation and welding. to vertical bars. Adding a wooden beam.
Step 4
Concreting - to do with pressure on the bars.
STAYS H > 90 CM
Step 1
Installation of reinforcing mesh.
Step 2
Installation of Formax 1000 to reinforcing mesh.
Step 3
Upper reinforcement installation and welding to vertical bars.
Step 4
Installation of stays or supports.
Step 5
Adding a wooden beam.
Step 6
Concreting - to do with pressure on the bars.
